OmnioIQ · Resources
ROI calculator
Enter your drivers, daily jobs and current software cost to see an estimate of annual savings, payback and three-year return.
I run a...
Your business
Active drivers or field workers in your operation.
Average deliveries or service calls a day. Fuel, productivity and arbitrage savings all scale with volume.
Monthly cost of your current routing or allocation system.
Percentage of drivers who leave each year.
Your savings
* Estimates use the assumptions listed under “How we calculate your savings” below. They are not guarantees. See how we measure.
Savings waterfall
Explore economic arbitrage
The 10-25% benchmark* is the sum of six mechanisms. Change the assumptions below to test them against your own numbers.
How to read this: each dimension shows potential value from your assumptions. The benchmark range (10-25% of operational costs) is a sanity check. If your total sits above it, either your operation has unusual opportunity or the assumptions need review. Start with Conservative.
Benchmark: 10-25% of your operational base (software and fuel costs).* Select a bar to change its assumptions.
= £23,625/yr
= £6,750/yr
= £8,438/yr
= £4,500/yr
= £7,500/yr
= £2,250/yr
* Benchmark ranges are planning assumptions, not measured results. See how we measure.
Cost comparison over time
How we calculate your savings
Every formula and assumption is shown here. The default view covers direct savings, driver retention and route efficiency.
1. OmnioIQ pricing
PILOT and CUSTOM are quoted individually, so the calculator does not model them. See pricing.
directSavings = currentAnnualCost - omnioAnnualCost directSavings can be negative, for example when moving from manual routing. The total always nets out the OmnioIQ subscription.
2. Driver retention savings
- Churn reduction: 50%*
- Recruitment cost: £2,000 per driver
Fair work allocation is assumed to improve retention.*
reducedChurn = churn × 0.50
newChurnCost = drivers × (reducedChurn/100) × £2K
savings = currentChurnCost - newChurnCost
3. Route efficiency savings
- Fuel cost per delivery: £5.33 (£8,000 per driver per year ÷ 1,500 deliveries at 6 a day)
- Fuel savings: 15%*
- Productivity value: £0.33 per delivery (£500 per driver per year ÷ 1,500)
Fuel and routing time scale with delivery volume, not headcount.
Formula
fuelSavings = jobsPerYear × (£8,000 ÷ 1,500) × 0.15
productivitySavings = jobsPerYear × (£500 ÷ 1,500)
total = fuelSavings + productivitySavings
4. Annual savings
+ retentionSavings
+ efficiencySavings
3-year ROI
threeYearCost = omnioAnnualCost × 3
ROI = (threeYearNetSavings / threeYearCost) × 100 totalSavings is already net of the OmnioIQ subscription (through directSavings), so the cost is not subtracted twice.
Assumptions behind the model
- Fuel savings of 15%*, at the low end of a 15-20% range.
- Driver recruitment cost of £2,000 to £3,000. The model uses £2,000.
- Fuel cost of £8,000 to £12,000 per driver per year, at about 6 deliveries a day. The model converts £8,000 to £5.33 per delivery so savings scale with your volume.
- Churn reduction of 50%*, applied to the churn rate you enter.
- Fuel savings apply where your operation pays for fuel. Leave them out if your drivers pay their own.
- Conservative and Full views include no speculative revenue uplift.
To check the result, change the inputs above. * Assumptions are planning figures, not guarantees. See how we measure.
Worked example: 25 drivers, 25% churn
Direct savings
= £18,000/yr
OmnioIQ: £299 × 12
= £3,588/yr
£14,412/yr
Retention savings
25 × 25% × £2K
= £12,500
Reduced (50%):
25 × 12.5% × £2K
= £6,250
£6,250/yr
Efficiency savings
150 × 250 × £5.33 × 0.15
= £30,000
Productivity:
150 × 250 × £0.33
= £12,500
£42,500/yr
Test it on your own routes.
Every plan starts with a one-month pilot and an ROI report at the end.